View PME271YD4100KR30_9023558.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 017_pme271ya_y2_300 ? 5/19/2016 1 benefts ? a pprovals: enec, ul, cul, cqc ? r ated voltage: 300 vac 50/60 hz ? ca pacitance range: 0.001 C 0.15 f ? l ead spacing: 10.2 C 25.4 mm ? capacitance tolerance: 20% for c > 0.1 f, 10% for c 0.1 f ? c limatic category: 40/115/56/b, iec 60068C1 ? t ape and reel packaging in accordance with iec 60286C2 ? r ohs compliant and lead-free terminations ? operating temperature range of ?40?c to +115?c ? 1 00% screening factory test at 3,000 vdc ? the highest possible safety regarding active and passive fammability overview the pme271y aCe series is constructed of multilayer metallized paper encapsulated and impregnated in self-extinguishing material meeting the requirements of ul 94 vC0. applications typical applications include worldwide use as electromagnetic interference suppressor in all y2 applications, line-to-earth. ac line emi suppression and rc networks pme271y aCe series metallized impregnated paper, class y2, 300 vac legacy part number system pme271 y a 4100 m r30 series rated voltage (vac) lead spacing (mm) capacitance code (pf) capacitance tolerance packaging y2, metallized paper y = 300 a = 10.2 b = 15.2 c = 20.3 d = 22.5 e = 25.4 the last three digits represent signifcant fgures. t he frst digit specifes the t otal number of digits. m = 20% (for c 0.1 f) k = 10% (for c > 0.1 f) see ordering options table new kemet part number system p 272 h e 102 m 300 a capacitor class series lead spacing (mm) size code capacitance code (pf) capacitance tolerance rated voltage (vac) packaging p = paper y2, metallized paper h = 10.2 q = 15.2 c = 20.3 d = 22.5 e = 25.4 see dimension table first two digits represent signifcant fgures. third d igit specifes number of ze ros. m = 20% (for c 0.1 f) k = 10% (for c > 0.1 f) 300 = 300 see ordering options table one world. one kemet
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 017_pme271ya_y2_300 ? 5/19/2016 2 benefts cont'd ? e xcellent self-healing properties ensure long life even when subjected to frequent over-voltages ? g ood resistance to ionization due to impregnated dielectric ? h igh dv/dt capability ? i mpregnated paper ensures excellent stability and reliability properties, particularly in applications with continuous operation ordering options table lead spacing nominal (mm) type of leads and packaging lead length (mm) kemet lead and packaging code legacy lead and packaging code 10.2 standard lead and packaging options bulk (bag) C short leads 6 +0/?1 c r06 bulk (bag) C max length leads 30 +5/?0 a r30 tape & reel (standard reel) h 0 = 18.5 +/?0.5 l r19t0 2khu/hdgdqg3dfndjlqj2slrqv tape & reel (large reel) h 0 = 18.5 +/?0.5 p r19t1 1dlyh iruphgr ammo pack h 0 = 16.5 +/?0.5 l af3 r30xa 15.2 standard lead and packaging options bulk (bag) C short leads 6 +0/?1 c r06 bulk (bag) C max length leads 30 +5/?0 a r30 tape & reel (standard reel) h 0 = 18.5 +/?0.5 l r19t0 2khu/hdgdqg3dfndjlqj2slrqv tape & reel (large reel) h 0 = 18.5 +/?0.5 p r19t1 6dqgdug/hdgdqg3dfndjlqj2slrqv bulk (tray) C short leads 6 +0/?1 c r06 bulk (bag) C max length leads 30 +5/?0 a r30 tape & reel (standard reel) h 0 = 18.5 +/?0.5 l r19t0 2khu/hdgdqg3dfndjlqj2slrqv tape & reel (large reel) h 0 = 18.5 +/?0.5 p r19t1 6dqgdug/hdgdqg3dfndjlqj2slrqv bulk (tray) C short leads 6 +0/?1 c r06 bulk (bag) C max length leads 30 +5/?0 a r30 tape & reel (standard reel) h 0 = 18.5 +/?0.5 l r19t0 2khu/hdgdqg3dfndjlqj2slrqv tape & reel (large reel) h 0 = 18.5 +/?0.5 p r19t1 film capacitors ac line emi suppression and rc networks C pme271y aCe series metallized impregnated paper, class y2, 300 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 017_pme271ya_y2_300 ? 5/19/2016 3 ordering options table cont'd dimensions C millimeters l b front view side view h ll p d p b h l d nominal tolerance nominal tolerance nominal tolerance nominal tolerance nominal tolerance 10.2 +/?0.4 +/?0.05 +/?0.4 +/?0.05 +/?0.4 +/?0.05 +/?0.4 +/?0.05 +/?0.4 +/?0.05 +/?0.4 +/?0.05 +/?0.4 +/?0.05 +/?0.4 +/?0.05 +/?0.4 +/?0.05 +/?0.4 +/?0.05 +/?0.4 +/?0.05 +/?0.4 +/?0.05 +/?0.4 +/?0.05 +/?0.4 +/?0.05 note: see ordering options table for lead length (ll) options. lead spacing nominal (mm) type of leads and packaging lead length (mm) kemet lead and packaging code legacy lead and packaging code 25.4 standard lead and packaging options bulk (tray) C short leads 6 +0/?1 c r06 bulk (bag) C max length leads 30 +5/?0 a r30 film capacitors ac line emi suppression and rc networks C pme271y aCe series metallized impregnated paper, class y2, 300 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 017_pme271ya_y2_300 ? 5/19/2016 4 performance characteristics rated voltage 300 vac 50/60 hz capacitance range 0.001 C 0.15 f capacitance tolerance 20% for c 0.1f, 10% for c > 0.1f temperature range ?40oc to +115c climatic category 40/115/56/b approvals enec, ul, csa, cqc dissipation factor maximum values at +23c 1 khz 1.3% test voltage between terminals the 100% screening factory test is carried out at 3,000 vdc. the voltage level is selected to meet the requirements in applicable equipment standards. all electrical characteristics are checked after the test. it is not permitted to repeat this test as there is a risk to damage the capacitor. kemet is not liable in such case for any failures. insulation resistance minimum value between terminals 12,000 m? in dc applications recommended voltage 1,000 vdc environmental test data test iec publication procedure vibration iec 60068C2C6 test fc 3 directions at 2 hours each 10 C 500 hz at 0.75 mm or 98 m/s 2 bump iec 60068C2C29 test eb 4,000 bumps at 390 m/s 2 solderability iec 60068C2C20 test ta solder globule method active flammability iec 60384C14 passive flammability iec 60384C14 needle-fame test humidity iec 60068C2C3 test ca +40c and 90 C 95% rh film capacitors ac line emi suppression and rc networks C pme271y aCe series metallized impregnated paper, class y2, 300 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 017_pme271ya_y2_300 ? 5/19/2016 5 approvals mark specifcation file number en/iec 60384-14 se/0140-27d ul 60384-14 can/csa-e60384-14-09 e73869 cqc 10001043354 environmental compliance all kemet emi capacitors are rohs compliant. table 1 C ratings & part number reference capacitance value (f) maximum dimensions in mm lead spacing (p) f o (mhz) dv/dt (v/s) new kemet part number legacy part number b h l 0.0010 3.9 7.5 13.5 10.2 53.0 2000 p272he102m300(1) pme271ya4100m(1) 0.0015 3.9 7.5 13.5 10.2 44.0 2000 p272he152m300(1) pme271ya4150m(1) 0.0022 3.9 7.5 13.5 10.2 37 2000 p272he222m300(1) pme271ya4220m(1) 0.0025 4.1 8.2 13.5 10.2 35 2000 p272hh252m300(1) pme271ya4250m(1) 0.0033 4.1 8.2 13.5 10.2 30 2000 p272hh332m300(1) pme271ya4330m(1) 0.0047 5.1 10.5 13.5 10.2 24 2000 p272hl472m300(1) pme271ya4470m(1) 0.0068 5.2 10.5 18.5 15.2 19 1400 p272qe682m300(1) pme271yb4680m(1) 0.0100 5.2 10.5 18.5 15.2 16 1400 p272qe103m300(1) pme271yb5100m(1) 0.0150 5.5 11 18.5 15.2 13 1400 p272qh153m300(1) pme271yb5150m(1) 0.0220 7.3 13 18.5 15.2 9.8 1400 p272qm223m300(1) pme271yb5220m(1) 0.0330 7.6 14 24 20.3 7 1000 p272ce333m300(1) pme271yc5330m(1) 0.0470 9 15 24 20.3 6 1000 p272cj473m300(1) pme271yc5470m(1) 0.0680 11.3 16.5 24 20.3 4.6 1000 p272cp683m300(1) pme271yc5680m(1) 0.0330 8 17 27 22.5 6.8 600 p272sj333m300(1) pme271yd5330m(1) 0.0470 8 17 27 22.5 5.8 600 p272sj473m300(1) pme271yd5470m(1) 0.0680 10 19 27 22.5 4.8 600 p272sp683m300(1) pme271yd5680m(1) 0.1000 12 22 27 22.5 3.8 600 p272su104m300(1) pme271yd6100m(1) 0.1000 12.1 19 30.5 25.4 3.9 400 p272ej104m300(1) pme271ye6100m(1) 0.1500 15.3 22 30.5 25.4 3.1 400 p272el154k300(1) pme271ye6150k(1) capacitance value (f) b (mm) h (mm) l (mm) lead spacing (p) f o (mhz) dv/dt (v/s) new kemet part number legacy part number (1) insert ordering code for lead type and packaging. see ordering options table for available options. film capacitors ac line emi suppression and rc networks C pme271y aCe series metallized impregnated paper, class y2, 300 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 017_pme271ya_y2_300 ? 5/19/2016 6 manual soldering recommendations following is the recommendation for manual soldering with a soldering iron. the soldering iron tip temperature should be set at 350c (+10c maximum) with the soldering duration not to exceed more than 3 seconds. recommended soldering temperature 0 50 100 150 200 250 300 350 400 0 1 2 3 4 5 6 7 8 soldering time (sec) soldering iron bit temperature (deg c) soldering process the implementation of the rohs directive has resulted in the selection of snagcu (sac) alloys or sncu alloys as primary solder. this has increased the liquidus temperature from that of 183oc for snpb eutectic alloy to 217 C 221oc for the new alloys. as a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. polypropyle ne capacitors are especially sensitive to heat (the melting point of polypropylene is 160 C 170oc). wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during sol dering. the recommended solder profles from kemet should be used. please consult kemet with any questions. in general, the wave soldering curve from iec publication 61760-1 edition 2 serves as a solid guideline for successful soldering. please see figure 1. refow soldering is not recommended for through-hole flm capacitors. exposing capacitors to a soldering profle in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. insert through- hole parts after the curing of surface mount parts. consult kemet to discuss the actual temperature profle in the oven, if through-hole components must pass through the adhesive curing process. a maximum two soldering cycles is recommended. please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. wave soldering recommendations 0 50 100 150 200 250 300 0 40 80 120 160 200 240 temperature ( c) time (s) ca 2 c/s ca 3.5 c/s typical ca 5 c/s cooling 2+3s max 115 c max t preheat t <150 c 100 c preheating typical first wave second wave 260 c film capacitors ac line emi suppression and rc networks C pme271y aCe series metallized impregnated paper, class y2, 300 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 017_pme271ya_y2_300 ? 5/19/2016 7 soldering process cont'd wave soldering recommendations cont'd 1. the table indicates the maximum set-up temperature of the soldering process figure 1 dielectric film material maximum preheat temperature maximum peak soldering temperature capacitor pitch 10 mm capacitor pitch = 15 mm capacitor pitch > 15 mm capacitor pitch 15 mm capacitor pitch > 15 mm polyester 130c 130c 130c 270c 270c polypropylene 100c 110c 130c 260c 270c paper 130c 130c 140c 270c 270c polyphenylene sulphide 150c 150c 160c 270c 270c 2. the maximum temperature measured inside the capacitor: s et the temperature so that inside the element the maximum temperature is below the limit: dielectric film material maximum temperature measured inside the element polyester 160c polypropylene 110c paper 160c polyphenylene sulphide 160c temperature monitored inside the capacitor. selective soldering recommendations selective dip soldering is a variation of refow soldering. in this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal fow soldering without touching the solder. when the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. the temperature profle for selective soldering is similar to the double wave fow soldering outlined in this document, however , instead of two baths, there is only one bath with a time from 3 to 10 seconds. in selective soldering, the risk of overheating is greater than in double wave fow soldering, and great care must be taken so that the parts are not overheated. film capacitors ac line emi suppression and rc networks C pme271y aCe series metallized impregnated paper, class y2, 300 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 017_pme271ya_y2_300 ? 5/19/2016 8 construction detailed cross section self-extinguishing resin self-extinguishing resin leads metal contact layer metal contact layer margin metallized impregnated paper (first layer) margin margin metallized impregnated paper (second layer) metal spraying material impregnated paper metallization single design ? multilayer impregnated paper dielectric 1 section winding scheme film capacitors ac line emi suppression and rc networks C pme271y aCe series metallized impregnated paper, class y2, 300 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 017_pme271ya_y2_300 ? 5/19/2016 9 marking back front top capacitance safety class voltage approval mark series iec climatic category manufacturing date code approval mark self healing film capacitors ac line emi suppression and rc networks C pme271y aCe series metallized impregnated paper, class y2, 300 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 017_pme271ya_y2_300 ? 5/19/2016 10 packaging quantities lead spacing (mm) thickness (mm) height (mm) length (mm) bulk short leads bulk long leads standard reel ? 360 mm large reel ? 500 mm ammo formed 10.2 3.9 7.5 13.5 2000 1000 700 1400 800 4.1 8.2 13.5 2000 1000 600 780 5.1 10.5 13.5 1600 800 600 1200 630 5.5 12.5 18 1000 500 600 6.5 12.5 18 600 400 400 7.5 14.5 18 600 400 400 8.5 16 18 400 250 400 5.2 10.5 18.5 1000 500 600 5.5 11 18.5 1000 500 500 6 12.5 18.5 600 400 400 7.3 13 18.5 600 400 400 800 7.8 13.5 18.5 600 400 400 8.5 14.3 18.5 500 300 350 7.6 14 24 1500 250 250 500 8.4 14 24 1200 200 250 500 9 15 24 1500 200 250 11.3 16.5 24 1000 150 180 400 8 17 27 1200 200 10 19 27 1000 150 200 12 22 27 800 100 180 350 10.6 16.1 30.5 1000 150 10.5 17.3 30.5 1000 100 12.1 19 30.5 800 100 15.3 22 30.5 600 75 film capacitors ac line emi suppression and rc networks C pme271y aCe series metallized impregnated paper, class y2, 300 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 017_pme271ya_y2_300 ? 5/19/2016 11 lead taping & packaging (iec 60286C2) taping specif cation dimensions in mm standard iec 60286C2 lead spacing +6/-0.1 f formed 7.5 10.2 15.2 20.3 22.5 f carrier tape width +/-0.5 w 18 18 18 18 18 18 +1/-0.5 hold-down tape width +/-0.3 w 0 9 12 12 12 12 position of sprocket hole +/-0.5 w 1 9 9 9 9 9 9 +0.75/-0.5 distance between tapes maximum w 2 3 3 3 3 3 3 sprocket hole diameter +/-0.2 d 0 4 4 4 4 4 4 feed hole lead spacing +/-0.3 p 0 (1) 12.7 (4) 12.7 12.7 12.7 12.7 12.7 distance lead C feed hole +/-0.7 p 1 3.75 7.6 5.1 8.9 5.3 p 1 deviation tape C plane maximum ?p 1.3 1.3 1.3 1.3 1.3 1.3 lateral deviation maximum ?h 2 2 2 2 2 2 total thickness +/-0.2 t 0.7 0.7 0.7 0.7 0.9 max 0.9 max sprocket hole/cap body nominal h 0 (2) 18 +2/-0 18 +2/-0 18 +2/-0 18 +2/-0 18.5 +/-0.5 18 +2/-0 sprocket hole/top of cap body maximum h 1 (3) 35 35 35 35 58 58 max (1) maximum cumulative feed hole error, 1 mm per 20 parts. (2) 16.5 mm available on request. (3) depending on case size. (4) 15 mm available on request. film capacitors ac line emi suppression and rc networks C pme271y aCe series metallized impregnated paper, class y2, 300 vac lead spacing 10.2 ? 15.2 mm lead spacing 20.3 ? 22.5 mm formed leads from 10.2 to 7.5 mm 0 0 0
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 017_pme271ya_y2_300 ? 5/19/2016 12 lead taping & packaging (iec 60286C2) cont'd ammo specif cations series dimensions (mm) h w 7 r4x, r4x+r, r7x, rsb 360 340 59 f5a, f5b, f5d f6xx, f8xx phexxx, pmexxx, pmrxxx 330 330 50 reel specif cations series dimensions (mm) d h w r4x, r4x+r, r7x, rsb 355 500 30 25 55 (max) f5a, f5b, f5d f6xx, f8xx phexxx, pmexxx, pmrxxx 360 500 30 46 (max) manufacturing date code (iecC60062) y = year, z = month year code month code 2000 m january 1 2001 n february 2 2002 p march 3 2003 r april 4 2004 s may 5 2005 t june 6 2006 u july 7 2007 v august 8 2008 w september 9 2009 x october o 2010 a november n 2011 b december d 2012 c 2013 d 2014 e 2015 f 2016 h 2017 j 2018 k 2019 l 2020 m film capacitors ac line emi suppression and rc networks C pme271y aCe series metallized impregnated paper, class y2, 300 vac h t w d w h
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 017_pme271ya_y2_300 ? 5/19/2016 13 kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america northeast wilmington, ma tel: 978-658-1663 southeast lake mary, fl tel: 407-855-8886 central novi, mi tel: 248-994-1030 irving, tx tel: 972-915-6041 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe sasso marconi, italy tel: 39-051-939111 skopje, macedonia tel: 389-2-55-14-623 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe wyboston, united kingdom tel: 44-1480-273082 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5877-1075 shanghai, china tel: 86-21-6447-0707 seoul, south korea tel: 82-2-6294-0550 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6701-8033 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation. film capacitors ac line emi suppression and rc networks C pme271y aCe series metallized impregnated paper, class y2, 300 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 017_pme271ya_y2_300 ? 5/19/2016 14 disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. film capacitors ac line emi suppression and rc networks C pme271y aCe series metallized impregnated paper, class y2, 300 vac

▲Up To Search▲

Price & Availability of PME271YD4100KR30

	To Download PME271YD4100KR30 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .